This document presents Flight Test Techniques, Data Analysis Methods, and Reporting examples related to installed turbine Power Available and Power Assurance demonstrations as required by CFR Title 14 Part 29.45(c) and (f).
This Aerospace Recommended Practice (ARP) defines the measurement parameters that may be used by a pilot or operator to monitor the thermodynamic health of a turboshaft engine in a helicopter and the measurement system accuracies desired.
It is recommended that all helicopter engine development programs include an evaluation of engine starting requirements. The evaluation should include starting requirement effects on helicopter weight, cost, and mission effectiveness. The evaluation should be appropriate to the engine stage of development.
Engines subject to dust, industrial pollution, saltwater contamination or other chemically laden atmosphere (including pesticides and herbicides) lose performance due to deposits of contaminants on surfaces in the aidgas flow path. Engine wash and engine rinse procedures are utilized to restore turbine engine performance. These procedures are generated by the engine manufacturer and are included in the Engine Maintenance/Service Manuals. For most turbine engines these procedures are similar in concept and practice; however, application details, choice of solvents and many other service features can vary from engine manufacturer to engine manufacturer and may even vary within the range of engine models produced by any manufacturer.
A tested method of data presentation and use is described herein. The method shown is a useful guide, to be used with care and to be improved with use.
This Aerospace Information Report (AIR) reviews the requirements to be satisfied by the engine mount systems and provides an outline of some suitable methods. Factors such as drive shaft alignment, engine expansion, mount crashworthiness, vibration isolation, and other effects on the installation are discussed.
This Aerospace Information Report (AIR) identifies considerations on power available and inlet distortion for rotorcraft with Inlet Barrier Filter (IBF) installations. This document provides a more in-depth understanding of the physics behind power available and inlet distortion characterization for rotorcraft with Inlet Barrier Filter (IBF) installations, including case studies and calculation examples. It is intended to support the methods of compliance to power available and inlet distortion requirements for rotorcraft with Inlet Barrier Filter (IBF) installations recommended in ARP6912.
The purpose of this AIR (Aerospace Information Report) is to provide aircraft and engine designers with a better understanding of helicopter turboshaft engine idle power characteristics and objectives to be considered in the design process. Idle is the lowest steady state power setting. At this setting, the engine typically does not produce enough power to obtain governed output shaft speed (i.e. the shaft speed is determined by the load imposed by the aircraft). In the aircraft, the engine is typically stabilized at this power setting after starting, prior to taxi and for some period of time after rotor shutdown for cool down prior to engine shutoff. Traditionally, the aircraft designer wants idle power scheduled as low as possible and of course, does not want any resulting aircraft operational difficulties such as overcoming the rotor brake. The engine designer, however, desires a higher scheduled power because of the reduced probability of engine operational problems.
A general method for the preliminary design of a single, straight-sided, low subsonic ejector is presented. The method is based on the information presented in References 1, 2, 3, and 4, and utilizes analytical and empirical data for the sizing of the ejector mixing duct diameter and flow length. The low subsonic restriction applies because compressibility effects were not included in the development of the basic design equations. The equations are restricted to applications where Mach numbers within the ejector primary or secondary flow paths are equal to or less than 0.3.
Turbine engines installed in helicopters require a highly sophisticated oil system to fulfill two tasks: a Cooling/oil supply b Lubrication While lubrication is an engine internal procedure, cooling and oil supply require more or less design activity on the aircraft side of the engine/airframe interface for proper engine function, depending on the engine type. The necessity for engine cooling and oil supply provisions on the airframe can lead to interface problems because the helicopter manufacturer can influence engine related functions due to the design of corresponding oil system components. This SAE Aerospace Information Report (AIR) deals with integration of engine oil systems with the airframe and gives information for both helicopter and engine manufacturers for a better understanding of interface requirements.
This SAE Aerospace Recommended Practice (ARP) identifies and defines a method of measuring those factors affecting installed power available for helicopter power plants. These factors are installation losses, accessory power extraction, and operation effects. Accurate determination of these factors is vital in the calculation of helicopter performance as described in the flight manual. It is intended that the methods herein prescribe and define each factor as well as an approach to measuring said factor. Only standard installations of turboshaft engines in helicopters are considered. Special arrangements leading to high installation losses, such as the fitting of an infrared suppressor may require individual techniques for the determination and definition of engine installation losses.
The purpose of this standard is to provide a method of evaluating helicopter fuel economy which accounts for the significant technical variables in helicopter and powerplant design.
This Aerospace Information Report deals with protection of helicopter aircraft engines against erosion. Applicability is restricted to aircraft having a disc loading of less than 15 pounds per square foot.
The purpose of this recommended practice is to establish a standard format for the presentation of helicopter mission data, which will provide data required to establish airframe and/or engine component life.
This SAE Aerospace Information Report (AIR) identifies Propulsion Engineer’s recommendations for the instrumentation that is required for the safe operation and maintenance of turbine engines as installed in helicopters. It should be used as a guide for cockpit layout, as well as a reference for maintenance considerations throughout the propulsion area. Propulsion instruments should receive attention early in the design phase of the helicopter. Maintenance and diagnostics recorders are not considered within the scope of this document. (See ARP1587, “Aircraft Gas Turbine Engine Monitoring System Guide”.)
This SAE Aerospace Information Report (AIR) defines the power spectrum during normal and emergency operations of a twin engine helicopter and thereby postulates suitable power plant rating structures. This document does not address the power requirements for single engine helicopters or those with more than two engines.
This SAE Aerospace Recommended Practice (ARP) provides a guide for the preparation of a Helicopter Engine/Airframe Interface Document and Checklist. This document and checklist is intended to provide complete relevant information on the characteristics, performance, and engine interfaces. Of most importance is the identification of the data and the location of data to assure that the engine manufacturer and the airframe manufacturer supply information that can be easily located by either manufacturer.
This SAE Aerospace Information Report (AIR) defines the helicopter bleed air requirements which may be obtained through compressor extraction and is intended as a guide to engine designers.
This SAE Aerospace Recommended Practice (ARP) defines the measurement parameters that may be used by a pilot or operator to monitor the thermodynamic health of a turboshaft engine in a helicopter and the measurement system accuracies desired.